go-ipfs 0.4.18 has ! This is one of - to ; 3 months in the making. Thanks to all our contributors for your awesome work!
The headline features this release are:
Experimental QUIC support – for faster and more efficient peer connections, better handling of lossy networks and improved NAT traversal.
Gossipsub pubsub routing algorithm – dramatically more efficient pubsub on , along with signed messages
Updated WebUI – a big update to the IPFS WebUI with expanded features and information across the board
add– refactors and new features to a number of IPFS commands.
Performance – numerous performance and efficiency improvements in a number of IPFS subsystems. IPFS is faster, smaller and more reliable.
First up, on the networking front, this release introduced experimental support for the QUIC protocol. QUIC is a new UDP-based network transport that solves many of the long standing issues with TCP.
For us, this means (eventually):
- Fewer local resources – TCP requires a file-descriptor per connection while QUIC (and most UDP based transports) can share a single file descriptor between all connections. This should allow us to dial faster and keep more connections open.
- Faster connection establishment – When client authentication is included, QUIC has a three-way handshake like TCP. However, unlike TCP, this handshake brings us all the way from 0 to a fully encrypted, authenticated, and multiplexed connection. In theory (not yet in practice), this should significantly reduce the latency of DHT queries which will improve a number of IPFS operations like adding and getting large volumes of data.
- Behaves better on lossy networks – When multiplexing multiple requests over a single TCP connection, a single dropped packet will bring the entire connection to a halt while the packet is re-transmitted. However, because QUIC handles multiplexing internally, dropping a single packets affects only the related stream.
- Better NAT traversal – NAT hole-punching is significantly easier and, in many cases, more reliable with UDP than with TCP.
However, we still have a long way to go. While we encourage users to test this, the IETF QUIC protocol is still being actively developed and will change. You can find instructions for enabling it here.
go-ipfs now supports the gossipsub routing algorithm and message signing.
The gossipsub routing algorithm is significantly more efficient than the current floodsub routing algorithm. Even better, it’s fully backwards compatible so you can enable it and still talk to nodes using the floodsub algorithm. You can find instructions to enable gossipsub in go-ipfs here.
Messages are now signed by their authors. While signing is now enabled by default, strict signature verification has not been and will not be for at least one release (probably multiple) to avoid breaking existing applications. You can read about how to configure this feature here.
🎛 Commands Changes
In terms of new toys, this release introduces 1) the
ipfs cid subcommand for working with CIDs, 2) a completely refactored
ipfs p2p command, 3) streaming name resolution, and 4) inline block support.
ipfs cid command allows users to both inspect CIDs and convert them between various formats and versions. Here are some examples:
# Print out the CID metadata (prefix) > ipfs cid format -f %P QmT78zSuBmuS4z925WZfrqQ1qHaJ56DQaTfyMUF7F8ff5o cidv0-protobuf-sha2-256-32 # Get the hex sha256 hash from the CID. > ipfs cid format -b base16 -f '0x%D' QmT78zSuBmuS4z925WZfrqQ1qHaJ56DQaTfyMUF7F8ff5o 0x46d44814b9c5af141c3aaab7c05dc5e844ead5f91f12858b021eba45768b4c0e # Convert a base58 v0 CID to a base32 v1 CID. > ipfs cid base32 QmT78zSuBmuS4z925WZfrqQ1qHaJ56DQaTfyMUF7F8ff5o bafybeicg2rebjoofv4kbyovkw7af3rpiitvnl6i7ckcywaq6xjcxnc2mby
ipfs p2p command allows forwarding TCP streams through two IPFS nodes from one host to another. It’s
ssh -L but for IPFS. It’s still experimental but we don’t expect too many breaking changes after this point (it will very likely be stabilized in the next release).
Here’s a quick summary of the breaking changes in this release:
- We don’t stop listening for local (forwarded) connections after accepting a single connection.
ipfs p2p stream lsoutput now returns more useful output, first address is always the initiator address.
ipfs p2p listener lsis renamed to
ipfs p2p ls
ipfs p2p listener closeis renamed to
ipfs p2p close
- Protocol names have to be prefixed with
/x/and are now just passed to libp2p as handler name. Previous version did this ‘under the hood’ and with
/p2p/prefix. There is a
--allow-custom-protocolflag which allows you to use any libp2p handler name.
ipfs p2p listener openwas renamed to
ipfs p2p listen
ipfs p2p stream dialgot renamed to
ipfs p2p forward
You can find documentation here, but here’s a quick example of connecting the WebUI of a remote IPFS node:
# On the 'remote' IPFS host > ipfs id -f "<id>/n" QmSiXjrYwLmDhRvAb3vK2TUP8W2pTDd34MhgCwpanVjdNT # Configure the p2p listener on the remote IPFS instance: > ipfs p2p listen /x/kickass/1.0 /ip4/127.0.0.1/tcp/5001 # On the 'local' IPFS host # Configure the p2p forwarder on the local host: > ipfs p2p forward /x/kickass/1.0 /ip4/127.0.0.1/tcp/5551 /ipfs/QmSiXjrYwLmDhRvAb3vK2TUP8W2pTDd34MhgCwpanVjdNT # Voila - point your browser at http://localhost:5551/webui to inspect your remote
ipfs name resolve streaming response
There is now a new flag for
ipfs name resolve –
--stream. When the command is invoked with the flag set, it will start returning results as soon as they are discovered in the DHT and other routing mechanisms. This enables certain applications to start prefetching/displaying data while the discovery is still running. Note that this command will likely return many outdated records before it finding and returning the latest. However, it will always return valid records (even if a bit stale).
ipfs add block inlining
In the previous release, we added support for extracting blocks inlined into CIDs. In this release, we’ve added support for creating these CIDs. You can now run
ipfs add with the
--inline flag to inline blocks less than or equal to 32 bytes in length into a CID, instead of writing an actual block. This should significantly reduce the size of filesystem trees with many empty directories and tiny files.
This release includes the latest, very shiny updated webui. You can view it by installing go-ipfs and visiting http://localhost:5001/webui. It deserves its own release note – oh look, it got one! Here’s a peek:
Kudos and thanks to the webui team! 👏
This release includes some significant performance improvements, both in terms of resource utilization and speed particularly when transferring lots of small files (or blocks). This section will go into some technical details so feel free to skip it if you’re just looking for shiny new features.
In this release, we’ve (a) fixed a slow memory leak in libp2p and (b) significantly reduced the allocation load. Together, these should improve both memory and CPU usage. How much you ask? Glad you asked.
Above is a graph of time our IPFS gateway nodes spend in GC. See the awesome looking light blue line at the bottom? That’s the node running 0.4.18. IKR?
This graph of time spent in execution has greater variability but the improvement is still pretty clear. You want the light blue one.
We’ve changed two of our most frequently used datastructures, CIDs and Multiaddrs, to reduce allocation load.
First, we now store CIDs encoded as strings, instead of decoded in structs (behind pointers). In addition to being more compact, our
Cid type is now a valid
map key so we no longer have to encode CIDs every time we want to use them in a map/set. Allocations when inserting CIDs into maps/sets was showing up as a significant source of allocations under heavy load so this change should improve memory usage.
Second, we’ve changed many of our multiaddr parsing/processing/formatting functions to allocate less. Much of our DHT related-work includes processing multiaddrs so this should reduce CPU utilization when heavily using the DHT.
Streams and Yamux
Streams have always plagued us in terms of memory utilization. This was partially solved by introducing the connection manager, keeping our maximum connection count to a reasonable number but they’re still a major memory sink.
This release sees two improvements on this front:
- A memory leak in identify has been fixed. This was slowly causing us to leak connections (locking up the memory used by the connections’ streams).
- Yamux streams now use a buffer-pool backed, auto shrinking read buffer. Before, this read buffer would grow to its maximum size (a few megabytes) and never shrink, but now these buffers shrink as they’re emptied and free up space efficiently.
Bitswap will now pack multiple small blocks into a single message thanks to ipfs/go-bitswap#5. While this won’t help when transferring large files (with large blocks), this should help when transferring many tiny files.
🛠 Refactors and Endeavors
This release saw yet another commands-library refactor, work towards the CoreAPI, and the first step towards reliable base32 CID support.
We’ve completely refactored our commands library (again). While it still needs quite a bit of work, it now requires significantly less boilerplate and should be significantly more robust. The refactor immediately found two broken tests and probably fixed quite a few bugs around properly returning and handling errors.
CoreAPI is a new way to interact with IPFS from Go. While it’s still not final, most things you can do via the CLI or HTTP interfaces can now be done through the new API.
Currently only the Go implementation exists, but there are plans to expose the new API via HTTP soon. We are also looking into creating an RPC interface to this API which could help performance in some use cases.
You can track progress in https://github.com/ipfs/go-ipfs/issues/4498
We’re continuing work to upgrade our default CID format to Base32 while preserving compatibility with existing CIDs. We need this change to improve the security of IPFS content in browsers. Currently, IPFS is usually used in browsers by browsing to
https://SOME_GATEWAY/ipfs/CID/.... There are two significant drawbacks to this approach:
- From a browser security standpoint, all IPFS “sites” will live under the same origin (SOME_GATEWAY).
- From a UX standpoint, this doesn’t feel very “native” (even if the gateway is a local IPFS node).
To fix the security issue, we intend to switch IPFS gateway links
https://CID.ipfs.dweb.link. This way, the CID will be a part of the “origin” so each IPFS website will get a separate security origin.
To fix the UX issue, we’ve been working on adding support for
ipfs://CID/... to web browsers through our ipfs-companion add-on and some new, experimental extension APIs from Mozilla. This has the same effect of putting the CID in the URL origin but has the added benefit of looking “native”.
Unfortunately, origins must be case insensitive. Currently, the most common CIDs are CIDv0 CIDs (those starting with
Qm) which are always base58 encoded and are therefore case-sensitive.
Fortunately, CIDv1 (the latest CID format) supports arbitrary bases using the multibase standard. Unfortunately, IPFS has always treated equivalent CIDv0 and CIDv1 CIDs as distinct. This means that files added with CIDv0 CIDs (the default) can’t be looked up using the equivalent CIDv1.
This release makes some significant progress towards solving this issue by introducing two features:
(1) The previous mentioned
ipfs cid base32 command for converting a CID to a case insensitive encoding required by domain names. This command converts an existing base58 CIDv0 to a CIDv1 encoded using base32.
(2) A hack to allow locally looking up blocks associated with a CIDv0 CID using the equivalent CIDv1 CID (or the reverse). This hack will eventually be replaced with a multihash indexed blockstore, which is agnostic to both the CID version and multicodec content type.
📋 Full Changelog
As always, you can find the full (massive) changelog over at ipfs/go-ipfs’s Github repository: https://github.com/ipfs/go-ipfs/blob/master/CHANGELOG.md#go-ipfs-changelog-1
Would you like to help contribute to the go-ipfs project?
- Join us on Github at https://github.com/ipfs/go-ipfs where you can find out more about the project.
- Check the issues with the help wanted label at the Ready column in our waffle board – https://waffle.io/ipfs/go-ipfs?label=help%20wanted
- Join an IPFS All Hands, introduce yourself and let us know where you would like to contribute or any cool demos of what you’ve built – https://github.com/ipfs/pm/#all-hands-call
- Join the discussion at http://discuss.ipfs.io/ and help users finding their answers.
- Join the Go Core Dev Team Weekly Sync 🙌🏽 and be part of the Sprint action!
⁉️ Do you have questions?
The best place to ask your questions about IPFS, how it works and what you can do with it, is at discuss.ipfs.io. We are also available at the #ipfs channel on Freenode.
点对点科技深耘IPFS与Filecoin技术，坚持区块链技术改变未来的信念。点对点 IPFS 数据中心是目前国内技术领先，性价比高、保障优的投资标的。自建杭州数据中心，合作数据中心分布于上海、宁波、河北、香港、斯德哥尔摩（瑞典）等地。点对点数据中心具有优秀的硬件配置与目前国内优质的网络节点资源。点对点科技力求将IPFS爱好者升级为IPFS领军者与受益者，让IPFS颠覆传统互联网，共同开启 WEB 3.0时代。